저도 같은 증상이 발생해서 여기에 물어 봅니다.
usb메모리로 xpenology를 설치하려는데
마이크로서버 gen8 이 리부팅 할 때 마다 cmos설정 값이 초기화 되버립니다.
xpenology USB설치와 연관이 있는지 모르겠지만
처음에는 cmos설정한대로 부팅이 되서 설치를하고 재부팅하면 마이크로서버 gen8의 cmos가 초기화 되버리는 증상입니다.
용도상 Raid 기능은 disable시키고 sata컨트롤러만 achi로 설정하고
serial 불 필요해서 disable시키고 F10키 눌러서 나오면 처음에 부팅 할때만 cmos설정한대로 되고
재부팅하면 날짜까지 bios 날짜에 맞춰져 default 되버립니다.
혹 마이크로서버 gen8에 xpenology 설치 하신분 내공 좀 부탁드립니다.
가상이 아니라 USB에
XPEnoboot 5.2-5565.2
를 USB에 부트이미지로 만들어서 설치 하고자 합니다.
Ƽ xpenology ý BIOS ʱȭ (ð) Ű װ ־ϴ.
ݵ ذȰ ƴ ýۿ ÿ Ǿ ʱȭ
Ͽϴ. Ȥ ̰ ƴұ ϴ.
off ̻̾µ ÿุ ϸ ʱȭ ˴ϴ.
wol ̿Ͽ ϰ ֽϴ.
̿ Խ صξϴ.
gen8 ֳ
ý ִ
˰ ֽϴ.
I sent an email question to HP pre-sales to see if there is a provision on the MicroServer for locking the BIOS.
۸ ϴٰ ߰ HP亯 ϳ
cmos read only۰ gen8 ִ°?
ε ʱȭؼ USB ʵ .
ٸ ϴ ص ٸ Ҷ ֱ ߾.
ٽ ϸ ƿµ
CDROM USB HDD enable · θ
Ƽ꿡 Xpenlogy ִ° USB̹Ƿ ˴ϴ.
cmos read only۰ ִٸ غ ʿ䰡 ְڱ.
ġ Ŵ ǥ ʱ HP翡 Ǹ ƾ ϰڱ.
ý BIOS ð ʱȭ Ű ־ iLO event log
BIOS Release time ٽ ۵˴ϴ.
ʴ Xpenology ۵Ǹ Ʈ ð ȭ ϱ
CMOS ¿ ߸ ð õDZ .
cmos read only մϴ.
71 page System maintenance switch
־
System maintenance switch
Position Default Function
S1 Off Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
S2 Off Off = System configuration can be changed.
On = System configuration is locked.
S3 Off Reserved
S4 Off Reserved
S5 Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6 Off Off = No function
On = ROM reads system configuration as invalid.
S7 ? Reserved
S8 ? Reserved
S9 ? Reserved
S10 ? Reserved
S11 ? Reserved
S12 ? Reserved
To access the redundant ROM, set S1, S5, and S6 to on.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
S2 On ص bios ¥
µǴ°
϶ bios
Ұؼ lock DZϴµ
ϸ ¥ bios
ٽ ˴ϴ
Ǹ HP . . . .