최근 버1260;1032; firmware/196; 업그/112;1060;드를 해도 read/write ratio1032; 변ᅆ1;1060; 안.104;고
hpacucli에서 cache ratio1032; 변ᅆ1;1060; 안.104;lj16; ,163;에 대해서
구글링1012; 해도 마땅한 NJ13;1060; 없습니다.
160;
# hpacucli
HP Array Configuration Utility CLI 8.70-8.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
HP Array Configuration Utility CLI 8.70-8.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
=> ctrl slot=1 modify cacheratio=50/50
Error: "cacheratio=50/50" is not a valid option for Smart Array P410 in Slot 1
160;160; There are no options currently available.
160;
원1064;1008; 0176;터리가 없Ǻ12;서. 그런데, FBWC라서... 0176;터리lj16; 큰 1032;0120;가없lj16;데...
160;
# hpacucli ctrl slot=1 show
Smart Array P410 in Slot 1
160;160; Bus Interface: PCI
160;160; Slot: 1
160;160; Serial Number: PACCR0L9VYU1QO4
160;160; Cache Serial Number: PBCDF0BRHYI0A5
160;160; RAID 6 (ADG) Status: Disabled
160;160; Controller Status: OK
160;160; Hardware Revision: Rev C
160;160; Firmware Version: 6.00-2
160;160; Rebuild Priority: Medium
160;160; Expand Priority: Medium
160;160; Surface Scan Delay: 15 secs
160;160; Surface Scan Mode: Idle
160;160; Queue Depth: Automatic
160;160; Monitor and Performance Delay: 60 min
160;160; Elevator Sort: Enabled
160;160; Degraded Performance Optimization: Disabled
160;160; Inconsistency Repair Policy: Disabled
160;160; Wait for Cache Room: Disabled
160;160; Surface Analysis Inconsistency Notification: Disabled
160;160; Post Prompt Timeout: 0 secs
160;160; Cache Board Present: True
160;160; Cache Status: OK
160;160; Accelerator Ratio: 100% Read / 0% Write
160;160; Drive Write Cache: Disabled
160;160; Total Cache Size: 1024 MB
160;160; No-Battery Write Cache: Disabled
160;160; Battery/Capacitor Count: 0
160;160; SATA NCQ Supported: True
160;160; Bus Interface: PCI
160;160; Slot: 1
160;160; Serial Number: PACCR0L9VYU1QO4
160;160; Cache Serial Number: PBCDF0BRHYI0A5
160;160; RAID 6 (ADG) Status: Disabled
160;160; Controller Status: OK
160;160; Hardware Revision: Rev C
160;160; Firmware Version: 6.00-2
160;160; Rebuild Priority: Medium
160;160; Expand Priority: Medium
160;160; Surface Scan Delay: 15 secs
160;160; Surface Scan Mode: Idle
160;160; Queue Depth: Automatic
160;160; Monitor and Performance Delay: 60 min
160;160; Elevator Sort: Enabled
160;160; Degraded Performance Optimization: Disabled
160;160; Inconsistency Repair Policy: Disabled
160;160; Wait for Cache Room: Disabled
160;160; Surface Analysis Inconsistency Notification: Disabled
160;160; Post Prompt Timeout: 0 secs
160;160; Cache Board Present: True
160;160; Cache Status: OK
160;160; Accelerator Ratio: 100% Read / 0% Write
160;160; Drive Write Cache: Disabled
160;160; Total Cache Size: 1024 MB
160;160; No-Battery Write Cache: Disabled
160;160; Battery/Capacitor Count: 0
160;160; SATA NCQ Supported: True
160;
먼1200; No-Battery Write Cache를 EnableȢ16;고, 다1020;에 ratio를 0148;ǂ12;야 합니다.
160;
# hpacucli
HP Array Configuration Utility CLI 8.70-8.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
HP Array Configuration Utility CLI 8.70-8.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
=> controller slot=1 modify nobatterywritecache=enable
=> controller slot=1 modify cacheratio=25/75
=> controller slot=1 modify cacheratio=75/25 (read 75%/write 25%. 1G FBWC라서...)
=> controller slot=1 modify cacheratio=25/75
=> controller slot=1 modify cacheratio=75/25 (read 75%/write 25%. 1G FBWC라서...)
160;
- to be continue -
(FBWC µµ ¿ÏÀü ¹«ÀûÀº ¾Æ´ÏÁö¿ä)
±×³ª¸¶, ¿äÁîÀ½¿¡´Â ÈÇÐ º£Å͸®°¡ ¾Æ´Ï¶ó Super-Capacitor ·Î ¹Ù²î¸é¼ º£Å͸®°¡ ÀÓ½ÅÇؼ ½ºÆ®·¹½º ¹Þ´Â°Ç ±×·¡µµ HP °è¿¿¡¼± ´ú ÇØÁö´Â Ãß¼¼ÀΰŠ°°³×¿ä.
ijÆнÃÅͳª ¹èÅ͸® °¡°ÝÀÌ ³Ê¹« ºñ½Î¼...
512mb¶ó°í Çصµ, ½ÇÁ¦ »ç¿ë°¡´ÉÇÑ ¸Þ¸ð¸®´Â 380mb Á¤µµ ¿´´ø °Í °°¾Æ¿ä.
³ª¸ÓÁö´Â OS ¿µ¿ª...