안녕Ȣ16;세요, NJ13;변 감사드립니다.

 

1200;도 1221;보를 찾고 1080;lj16;데요, 매뉴얼에서 보면 JBODlj16; 말씀Ȣ16;신 ,163; 처/100; Ȣ16;드를 각각1004;/196; 1064;식Ȣ16;1648; 않lj16; ,163; 같습니다.

아래 메뉴얼에서 1228;1068; 아래1032; JBOD에 대한 글1060; 1080;습니다.

 

아마 Ȣ16;드를 설치Ȣ16;시고 1060;ᇼ1;1012; Ȣ16;1648; 않1004;셔서 에러가 없1004;신,163; 같1008;데요....

1200;lj16; JBOD/196; 물/140;1080;lj16; Ȣ16;드들1012; 0177;업Ȣ16;고, 다시 ᆆ1;lj16; 도1473;에 에러가 DŽ12;,163; 같습니다.

매뉴얼/196;lj16; Raid Ꮢ1;션에 1080;lj16; ,163; 같네요...

 

오늘 1665;에 가면 남lj16; Ȣ16;드/196; Pass-Thorugn 기능1012; 한번 찾아봐야 ,192;습니다.

 

 

6.8 Physical Drive
Choose this option from the Main Menu to select a physical disk and to perform the operations listed below.

6.8.1 Create Pass-Through Disk
To create pass-through disk, move the mouse cursor to the main menu and click on the Create Pass-Through link. The relative setting function screen appears.
Disk is no controlled by the SATA RAID controller firmware and thus cannot be a part of a volume set. The disk is available to the operating system as an individual disk. It is typically used on a system where the operating system is on a disk not controlled by the RAID firmware. User can also select the cache mode, Tagged Command Queuing, SCSI channel/SCSI_ID/SCSI_LUN for this volume.

6.8.2 Modify Pass-Through Disk
Use this option to modify the Pass-Through Disk Attribute. User can modify the cache mode, Tagged Command Queuing, and SCSI channel/ID/LUN on an existed pass through disk.
To modify the pass-through drive attribute from the pass-through drive pool, move the mouse cursor bar to click on Modify Pass-Through link. The Select The Pass Through Disk For Modification screen appears tick on the Pass-Through Disk from the pass-through drive pool and click on the Submit button to select drive.
The Enter Pass-Through Disk Attribute screen appears, modify the drive attribute values, as you want.
After you complete the selection, tick on the Confirm The Operation and click on the Submit button to complete the selection action.

6.8.3 Delete Pass-Through Disk
To delete pass-through drive from the pass-through drive pool, move the mouse cursor bar to the main menus and click on Delete Pass Through link.
After you complete the selection, tick on the Confirm The Operation and click on the Submit button to complete the delete action.

6.8.4 Identify Selected Drive
To prevent removing the wrong drive, the selected disk LED will light for physically locating the selected disk when the Identify Selected Drive is selected.
To identify the selected drive from the drives pool, move the mouse cursor bar to click on Identify Selected Drive link. The Select The IDE Device For identification screen appears tick on the IDE device from the drives pool and Flash method. After completing the selection, click on the Submit button to identify selected drive.

6.9 System Controls
6.9.1 System Config
To set the raid system function, move the cursor bar to the main menu and click on he Raid System Function link. The Raid System Function menu will show all items. Move the cursor bar to an item, then press Enter key to select the desired function.
? System Beeper Setting
The Alert Beeper function item is used to Disabled or Enable the SATA RAID controller alarm tone generator.
? Background Task Priority
The Raid Rebuild Priority is a relative indication of how much time the controller devotes to a rebuild operation. The SATA RAID controller allows user to choose the rebuild priority (ultraLow, Low, Normal, High) to balance volume set access and rebuild tasks

 

? JBOD/RAID Configuration
JBOD is an acronym for “just a Bunch Of Disk̶1;. It represents a volume set that is created by the concatenation of partitions on the disk. It can see all 8 disks, when you selected the JBOD option. User needs to deleted the RAID set, when you want to change the option from the RAID to the JBOD function.