1064;텔 보드 내1109; 소프트웨Ǻ12; /112;1060;드 사용Ȣ16;/140;고 합니다.

C600 업그/112;1060;드ᓟ1;1012; 보드에 껴서 8개1032; SATA Ȣ16;드가 사용가능한데... 문1228;lj16; .160;개1032; 4포트1676;리 SCU가 1080;lj16;데.....168;간에 /112;1060;드를 1648;원Ȣ16;1648; 않lj16;,163;처/100; 드라1060;버 설명서에 나와1080;네요. ㅠㅠ 

A SAS Wide port spanning SCU0 and SCU1 is not supported. 라고 써1256; 1080;1004;면 SATA1068;ᅆ1;우lj16; SCU0와 SCU1간에 포트 스패0141;1060; 가능한,148;가요??

Intel® RSTe AHCI & SCU Software RAID driver  설치했구요.

만약 안.108;다면 4개, 4개를 1228;각각 써야Ȣ16;lj16;데 말1060;1424;.

OSlj16; 여ǥ16;1032; 2개 SATA /196; SSD 연결할,144;구요.

1060;럴ᅆ1;우 Ǻ12;떻,172; 구성Ȣ16;lj16;,172; 1339;1012;까요? 2TB HGST Ȣ16;드가 6개~ 8개 1080;습니다. 최1201;1032; 갯수만 사용Ȣ16;고 남lj16;,148; 다른 컴퓨터에서 사용Ȣ16;/140;합니다.

PCI 슬ǘ15;1060; Ȣ16;나1104;1060;고 총알 문1228;/196; /112;1060;드카드lj16; 생각Ȣ16;고 1080;1648; 않습니다.

==================
Known Restrictions
==================
1. SAS features are enabled on SATA/SAS Capable Controller if appropriate Intel(R) RAID C600 Upgrade Key is present in the system.
2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled.
3. Only 4 drive RAID 10 is supported at this time.
4. MPIO Load Balancing in RAID Mode is unsupported
5. A SAS Wide port spanning SCU0 and SCU1 is not supported.
6. Plugging both SCU into the same expander is not supported
7. Some WD 6G SAS drives (S25/S35 family) are not supported
8. POST messages are displayed only if more than one drive is attached.
9. Performing a RAID Migration/Rebuild may not result in all of the appropriate LEDs blinking correctly.
10. A manual verify/repair may be required after an unexpected shutdown with running heavy I/O on a RAID volume.
11. RAID volume names should be less than 16 characters.
12. 3.7 release does not support Windows Vista.  Use prior release for Windows Vista.